The curtain rod is become a fundamental part of window treatments. In different designs, different finishes and with interchangeable finials that add character to the rod they are hard to pass up. As a matter of fact, ONA Wrought Iron Drapery Hardware has some very pretty and very unique curtain rods and finials. Do not let a hollow plaster wall deter you from hanging your choice of curtain rod, as hollow wall screw anchors are available to hang even the heaviest items.
Hanging drapery hardware in plaster can be tricky because of the composition of plaster walls. Plaster is a hard surface with a configuration similar to concrete or plaster of Paris. This top finish is applied over a system of wood or metal lathing. Plaster in an older home may be brittle and will often crumble. Before purchasing anchors consider the weight of the draperies you plan to hang to determine the type of anchor or fastener used.
If you plan to hang light weight curtains:
Pre-Drill a hole into the plaster that is slightly smaller in diameter than the mounting screws you will be using. Use a hand screwdriver rather than a motorized drill driver to insert the screw into the plaster. Over tightening the screw may pull it out of the wall. If the screw pulls does come out because you’re overzealous, a plastic anchor installed in the screw hole will solve the problem.
Medium Weight Drapery Rods:
Plastic anchors should be used for medium-weight rods. Mark the wall and then pre-drill the holes slightly smaller than the plastic anchor you will use. Gently tap the anchor into the whole r and use the screws that came with the anchors to install the bracket. Again, over tightening the anchor may end up in it pulling out of the wall. Tighten just enough for the anchor to expand and snugly fit in to the plaster wall.
Heavy Weight Drapery Rods:
For heavy rods toggle bolts are going to be needed to hold it in place. Check the package for the drill bit size recommended to drill pre-marked holes in the plaster wall. Insert the bolts through the drapery rod bracket, then screw on the winged nut .Gently screw the nut up the shaft of the bolt. The winged nut will open on the behind the wall increasing the amount of area to support the weight of the drapery rod. If the winged nuts fall out, they will drop down into the wall necessitating a new winged nut to be installed.
You have more options than ever when it comes to curtains and their accessories. It can be overwhelming to shop and see all of the different choices. Remember to keep your purpose in mind, and you will have no problem selecting the right ones for your home. Continental Window Fashions is proud to present the ONA Wrought Iron Drapery Hardware collection of high quality drapery hardware to their loyal customers. With free shipping on orders of $100 or more and 9am – 5pm customer support, Monday- Friday, Continental Window Fashions strives to make your ordering process as simple as possible. Online ordering is available or you may call us toll free at 866-375-4500 to place your order over the phone.